thermometrics double insulated chip thermistor with insulated wires features ? waterproof to ip68 ? withstands freeze/thaw cycling ? available using any device in the thermometrics standard nk and dc95 ranges ? range of wire lengths 11.81 in to 196.85 in (300 mm to 5000 mm) (dimension wl on page 2) ? suitable for refrigeration applications, including evaporators ntc type ji a mphenol advanced sensors
type ji specifications description chip thermistor housed in a tip, which is molded onto flexible circular cable. tip and outer cable insulation material is thermoplastic elastomer. tinned copper conductors have individual polyolefin insulation. options ? other resistance C temperature characteristics ? other wire lengths data ? temperature range: -40f to 221f (-40c to 105c) ? insulation resistance: >100 mw at 500 vdc ? wire conductors: 7 x 0.23 mm diameter (0.30 mm 2 ) ? resistance - temperature characteristics: refer to nk and dc95 data sheets ordering information the code number to be ordered may be specified as follows: code type ji double insulated with insulated wires code type 103c1r2 nk103c1r2 see nk or dc95 data sheets f103w dc95f103w code wire length wl in mm l301 300 10 l501 500 10 l751 750 20 l102 1000 20 l152 1500 25 l202 2000 25 l252 2500 50 l302 3000 50 l352 3500 50 l402 4000 50 l452 4500 50 l502 5000 50 ji - ____ - ____ typical model number resistance characteristic and wire length are specified by the product code: e.g. ji103c1r2 or jif103w other wire lengths are available for quantities > 5000 pieces as above with a wire tolerance at > 3.28 ft (1 m) of +100 /- 0 mm (+3.9 in /- 0 in) 0.197 in (5 mm) ? maximum 0.138 in (3.5 mm) ? maximum 0.787 in (20 mm) nominal wl ntc type ji dimensions aas-920-350a-04/2014 www.amphenol-sensors.com ? 2014 amphenol corporation. all rights reserved. specifcations are subject to change without notice. other company names and product names used in this document are the registered trademarks or trademarks of their respective owners.
|
